ALM 200 T Dry-running pump - without fittings DAB.ALM

Product detailed description

ALM 200 T Dry Running Pump - without fittings

• ALM 200 and ALP 800 have bronze body and spacer
• Mechanical seal: carbon/ceramic
• Closed asynchronous motor cooled by external ventilation
• Built-in thermal protection and capacitor for single-phase version
• For three-phase motors, external motor overload protection must be installed
• Electrical protection rating: IP55
• Insulation class: F
• Made to CEI 2-3 standard
• Fluid temperature range: +15 °C to +120 °C
• Operating range: from 0.6 to 6.5 m3/h with a discharge up to 7.7 m
• Pumped liquid: clean, free of solids and abrasives, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
• Maximum working pressure: 10 bar (1000 kPa)
• ALM 500 and ALP 2000 are cast iron
• Mechanical seal: carbon/ceramic
• Closed asynchronous motor cooled by external ventilation
• Built-in thermal protection and capacitor for single-phase version
• For three-phase motors, external motor overload protection must be installed
• Electrical protection rating: IP55
• Insulation class: F
• Made to CEI 2-3 standard
• Fluid temperature range: +15 °C to +120 °C
• Operating range: from 0.6 to 8.4 m3/h and with a discharge up to 21 m
• Pumped liquid: clean, free of solids and abrasives, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
• Maximum working pressure: 10 bar (1000 kPa)