Wholesale e-shop

Assembly distributor IVAR.CI 557 VP, 9-way

Code: 557677VP

naparovana cena na magic

Brand: IVAR

25322 dual mix zostava pre kombinaciu vykurovania skrina p max 4 1 xek 9cestny mosadz

25322 dual mix zostava pre kombinaciu vykurovania skrina p max 4 1 xek 9cestny mosadz

25322 1 dual mix zostava pre kombinaciu vykurovania skrina p max 4 1 xek 9cestny mosadz

–20 % €915,60 / pcs

Detailed information

Show all related products

Product detailed description

Assembly distributor IVAR.CI 557 VP, dimension: 1" x EK, 9-way

- DUAL - MIX - assembly for the combination of underfloor heating with radiator heating

PN 6, T = +90 °C
connection thread internal 1” F
material brass CW617N

Assembly includes:

manifold with control flow meters
collector with shut-off valves
fixing brackets
thermostatic valve with thermostatic head and separate immersion temperature sensor to control to constant temperature
regulating fitting
circulating pump with wiring
insurance thermostat
2 pcs automatic bleeder valves
thermometer
2 pcs rotary drain valves

Recommended for a radiator system temperature gradient of +75 ?C / +65 ?C

Set circulation pump: DAB.EVOSTA 2 40-70/130

Circulation pump switching is not part of the manifold, it can be solved by a control or a control thermostat for circulation pumps IVAR.AC 614 E.

Pump rotation frontal to position A = 165, construction depth= 160 mm

Pump rotation lateral to position A = 220, construction depth= 132 mm

Note:

The thermostatic valve at the inlet to the assembly can alternatively be replaced by a thermostatic valve with Vats flow, Kv, type VDS 01, 02.

Warning:

the flow meter is integrated into the inlet water control fitting
the assembly is NOT intended for use in combination with a condensing boiler or heat pump
the vendor is not responsible for functional defects caused by impurities in the system

Caution:

Before any commissioning of the , especially when combining underfloor and radiator heating, it is strongly recommended to flush the entire system according to the manufacturer's instructions. We recommend treating the system with GEL.LONG LIFE 100.

The manifolds are stored in cabinets, their recommended lengths are given in the manifold table. Fitting the dividers in the highest point is virtually a requirement (beware of level changes in floor plans). The exception to this is the venting of small floor dividers on the upper floor via the bathroom ladder. If the floor system is made only in the bathrooms, it is possible to use piping from the return branch of the radiator system with a protector or to use a direct acting temperature controller at the end of this parallel loop to ensure cooling to a low temperature level (caution! it must be thermally separated from the return line of the radiator circuit so that it is not thermally affected).

For further information, you can go to https://www.systemova-doska.sk/podlahove-vykurovanie/

Additional parameters

Category:	IVAR CI 557 VP
Warranty:	2 roky
Weight:	28.405 kg
Posledná aktuálizacia ceny:	21.11.2024 21:00:35

Show all alternative products

Be the first who will post an article to this item!

Add a comment

Vytvořil Shoptet | Design Shoptetak.cz.