Assembly distributor IVAR.CS 553 DRS, 9-way

Code: 553777BS

naparovana cena na magic

Brand: IVAR

25097 zostava rozdelovac zberac bez skrine 1 xek 9cestny mosadz

25097 1 zostava rozdelovac zberac bez skrine 1 xek 9cestny mosadz

–20 % €421,60 / pcs

In stock SVK

Detailed information

Show all related products

Product detailed description

Divider AssemblyIVAR.CS 553 DRS, 1" x EK, 9-way

PN 10, T = +120°C
assembly includes: distributor with regulating fittings, manifold with shut-off valves, fixing brackets, 2 pcs of ball valves with fittings, 2 pcs of termination with automatic vent valve and swivel drain valve
Material brass CW617N

Assembly for radiator heating or for sanitary distribution without pump fitted with control valves.

Recommended for a gradient of the radiator part of the system +75 ?C / +65 ?C

Circulation pump fitted:without pump (not necessary as the pump replaces the boiler)

To facilitate the adjustment of the underfloor heating control parameters, we recommend fitting the assembly with thermometers and flow meters.

Note: The seller is not responsible for functional defects caused by impurities in the system.

Before any commissioning of the , especially when combining underfloor and radiator heating, it is strongly recommended to flush the entire system according to the manufacturer's instructions. We recommend treating the system with GEL.LONG LIFE 100.

The manifolds are stored in cabinets, their recommended lengths are given in the manifold table. Fitting dividers in the highest point is virtually a requirement (beware of level changes in floor plans). The exception to this is the venting of small floor dividers on the upper floor via the bathroom ladder. If the floor system is made only in the bathrooms, it is possible to use piping from the return branch of the radiator system with a protector or to use a direct acting temperature controller at the end of this parallel loop to ensure cooling to a low temperature level (caution! it must be thermally separated from the return line of the radiator circuit so that it is not thermally affected).

For further information, you can go to https://www.systemova-doska.sk/podlahove-vykurovanie/