Clamp fitting - for copper pipe, 12 x 1 - EK

Product detailed description

Fasteners - for copper pipe, IVAR.TR 4430, size: 12 x 1 - EK, packing: 40 pcs in bag / 320 pcs in box

• PN 10, T = +120 °C
• Enclude Eurocone (EC)
• use for Cu and IVAR.C-STEEL piping
• material brass CW617N, O-ring - EPDM
• tightening torque 35 - 45 Nm for Cu wiring
• tightening torque 40 - 50 Nm for IVAR.C-STEEL piping

2. Insert the pipe and the appropriate EPDM gasket into the fitting and ensure that everything is clean and that there is no damage to the O-ring.

3. Fit the nut onto the thread and hand tighten, use the appropriate size AC 670 / AC 671 spanner to fully tighten

Rubber parts must not be lubricated with mineral oils under any circumstances, only silicone based lubricant should be used on EPDM material.