Clamp fitting - for PEX pipe, 16 x 2,2 PEX - EK
Code: 500681Related products
Product detailed description
Fasteners - for PEX pipe, IVAR.TP 4410, size: 16 x 2,2 PEX - EK, packing: 40 pcs in bag / 320 pcs in box
- PN 10, T = +120 °C
- Enclude Eurocone (EC)
- material brass CW617N, O-ring - EPDM
- tightening torque 30 - 40 Nm
- suitable for PEX pipe
Follow these instructions to properly fit the clamp fitting:
1. Install the clamp fitting in the order and in the snow as indicated in the following illustrations.
2. Insert the pipe and the appropriate EPDM gasket into the fitting and ensure that everything is clean and that there is no damage to the O-ring.
3. Fit the nut onto the thread and hand tighten, use the appropriate size AC 670 / AC 671 spanner to fully tighten
Rubber parts must not be lubricated with mineral oils under any circumstances, only silicone based lubricant should be used on EPDM material.
Additional parameters
| Category: | clamping screws for pex |
|---|---|
| Warranty: | 2 roky |
| Weight: | 0.055 kg |
| Posledná aktuálizacia ceny: | 23.05.2024 0:01:40 |
Be the first who will post an article to this item!
Add a comment