DAB.ESYBOX DIVER - submersible 7" pumps with frequency converter

AUTOMATIC PUMPS WITH FREQUENCY CONVERTER / SUBMERSIBLE 7" BOREHOLE AND WELL PUMPS WITH FREQUENCY CONVERTER

DAB.ESYBOX DIVER

The 7" multistage electronic variable speed control pumps are designed for pumping clean water from
wells, sumps and containers, and cisterns. Can be used for complete and partial immersion or for pumping
on the surface (with suitable accessories). Suitable for use for pressure boosting, reuse
rainwater, gardening and irrigation in the domestic environment. The pump can also be installed
horizontally. The pump is equipped with PLC (PowerLine Communication) and Wi-Fi technology. It is also available
in X version with 1" inlet and in the X assembly, which includes a 1 metre suction hose and a float to prevent suction
dirt from the bottom. The entire pump is IP68 rated. With the DOC68 accessory (on request) it is possible to
it can be used as a surface pump with IP68 degree of protection, so it can be used under water.

Operating range: flow rate up to 7.2 m3/h with a discharge up to 55 m
Type of pumped liquid: Clean, no solid or abrasive particles, non-viscous, non-aggressive, non-crystallising, chemically neutral
Throughput: 2 mm
Minimum suction depth: 110 mm
Minimum level height: 35 mm
Liquid temperature range: +0 °C to +50 °C
Minimum and maximum ambient temperature: < 0 °C / +50 °C
Max.
Adjustable constant pressure: factory set at 3 bar, adjustable from 1 to 5.5 bar
Discharge connection: threaded 5/4"
Maximum pump diameter: 185 mm
Impeller material: Technopolymer/ stainless steel AISI 304
Maximum number of starts: 60/h
Continuous operation: yes
Degree of protection: IP68
Motor insulation class: F
Power cable (m), plug: 15 m with plug
Single-phase power: 1x230 V 50 Hz
Possible installation methods: fixed, horizontal or vertical. Submerged or partially submerged. Can be installed on the surface, under the water surface, or after installing the DOC68 accessory outdoors in a vertical position (not included). Special design on request: X design with suction kit for suction higher at the surface. Version for surface installation (DOC68 accessory required)