Domestic waterworks with submersible pump 3 SQIBO - 0,75 / 60l

Product detailed description

Domestic waterworks with submersible spindle pump 3 SQIBO - 0,75 / 60l 230V is designed for pumping drinking and domestic water. The practical use of the submersible pump 3 SQIBO - 0.75 / 60l is primarily in the fact that it can be used for pumping water from greater depths than 8 m. The domestic waterworks with submersible pump 3 SQIBO - 0.75 / 60l is suitable for setting up water supply systems in family houses, cottages, summer residences, schools and farm facilities, as well as for the purpose of supplying water for spraying and irrigating gardens. The submersible pump used in this domestic waterworks is a spindle pump and can therefore also be used in fresh/new wells and boreholes. It can also suck and pump water containing sand or other abrasive substances that are usually still present in fresh/new wells. If the spindle pump is used in a borehole or well that contains the abrasive substances mentioned above, the spindle may become abraded over time and the pump will lose pressure. In such a case, the pump is replaced by replacing the entire mechanics, i.e. the whole set - spindle, rotor, stator. Since the set is basically a spare material, which can last for years without damage in some places and less in others, depending on the application, the warranty covers only the replacement work. The set - spindle, rotor, stator is for 13.-€,, as a whole. After replacement, the pump is like new again. Please note the related products. At each home waterworks there are products that are most often used and that you may need. Of course, when choosing, you can also look at other products from our wide range, and choose the ones that suit you best. The domestic waterworks with submersible pump SQIBO - 0,75 /60L includes: - pump SQIBO - 0,75 - pressure vessel standing 60L AQUA OLA - pressure switch PC-2 - nipple 1" - non-return valve 1" - connecting hose 80cm - transition piece with external thread 32x1" - transition piece with internal thread 32x1" - ball valve MF, M 1"