ESYBOX DIVER 55/120 Submersible 7" automatic pump with frequency converter - action DAB.ESYBOX DIVER

Product detailed description

ESYBOX DIVER 55/120 Submersible 7" Automatic Pump with Frequency Converter *AD*

7" multistage electronic variable speed control pumps are designed for pumping clean water from
wells, sumps and vessels, and cisterns. Can be used for full and partial immersion or surface pumping (with suitable accessories). Suitable for use for pressure boosting, rainwater reuse, gardening and domestic irrigation. The pump can also be installed
horizontally. The pump is equipped with PLC (PowerLine Communication) and Wi-Fi technology. It is also available
in the X version with 1" inlet and in the X assembly, which includes a 1 metre suction hose and a float to prevent the suction of
dirt from the bottom. The entire pump is IP68 rated. With the DOC68 accessory (on request) it can be
used as a surface pump with IP68 degree of protection, so it can be used under water.

- Operating range: flow rate up to 7.2 m3/h with a discharge up to 55 m
- Type of pumped liquid: Clean, no solid or abrasive particles, non-viscous, non-aggressive, no crystallization, chemically neutral
- Transmissivity: 2 mm
- Minimum suction depth: 110 mm
- Minimum level height: 35 mm
- Fluid temperature range: +0 °C to +50 °C
- Minimum and maximum ambient temperature: 0 °C / +50 °C
- Max. 15 m
- Adjustable constant pressure: factory set at 3 bar, adjustable from 1 to 5.5 bar
- Discharge connection: threaded 5/4"
- Maximum pump diameter: 185 mm
- Impeller material: technopolymer/ stainless steel AISI 304
- Maximum number of starts: 60/h
- Continuous operation: yes
- Degree of protection: IP68
- Motor insulation class: F
- Power cable (m), plug: 15 m with plug
- Single-phase power: 1x230 V 50 Hz
- Possible installation methods: fixed, horizontal or vertical. Submerged or partially submerged. Can be installed on the surface, under the water surface, or after installing the DOC68 accessories outside in a vertical position (not included). Special design on request: X design with suction kit for suction higher at the surface. Version for surface installation (DOC68 accessory required).