EVOSTA2 80/150 SAN 1" Electronic circulator for hot water systems DAB.EVOSTA2 SAN
Code: 60186588Related products
Product detailed description
EVOSTA2 80/150 SAN 1" Electronic Circulation Pump for Hot Water Systems
EVOSTA2 SAN circulators are suitable for circulating hot water in small spacesdomestic systems. Self-protected synchronous ball-rotor motor requiring only one sealing ring between the motor and pump body. Easy to clean or replace. Pump body with internal thread R 1/2" (G 1/2" ) in the R version or with check valve and insulation as standard in the V version for 1/2" (G 1") male thread connector.Electronic circulation pumps EVOSTA2 SAN with synchronous motor with permanent
magnet and frequency converter designed for hot water circulation. The circulator range ensures high
efficiency in all applications and delivers significant energy savings. The pump incorporates an electronic device to
detect changes in system pressure and automatically adjusts output, ensuring maximum efficiency with minimum energy consumption.
All models have a single control sequence button, a vent plug and allow manual release of the motor shaft. Bronze
pump body, stainless steel casing. Waterproof electronics with IPX5 protection class.
- Operating range: from 0.4 to 4.2 m3/h with a discharge of up to 8 m
- Fluid temperature range: from -10 °C to +110 °C
- Maximum working pressure: 10 bar (1000 kPa)
- Classification: IPX5
- Insulation Class: F
- Installation: with horizontal motor shaft position
- Voltage: 1x230 V/50/60 Hz
- Brushed liquid: pure without solids and mineral oils, no viscosity, chemically neutral with properties close to water (max. glycol content 30%)
Additional parameters
Category: | DAB.EVOSTA2 SAN - electronic circulation pumps for hot water systems |
---|---|
Posledná aktuálizacia ceny: | 09.10.2024 7:57:54 |
Be the first who will post an article to this item!
Add a comment