FEKA 6200.4 T Submersible Sump Pump DAB.FEKA

FEKA 1400 - 1800

• Asynchronous, submersible motor for continuous operation
• Standard thermal protection in the winding, multi-core lead
• Pumps shall be equipped with a control and protection system supplied separately
• Class of protection: IP68
• Insulation class: F
• Made to CEI 2-3 standard
• Maximum immersion depth: 10 m
• Liquid temperature range: 0 °C to +55 °C
• Pumped liquid: sewage and raw water containing particles or long fibres, non-aggressive
• Operating range from 3 to

FEKA 2000

Robust sludge pump with swirl impeller

• Asynchronous submersible motor for continuous operation, two or four pole
• Thermal protection in the winding shall be connected to the control and protection system
• Electrical protection rating: IP68
• Insulation class: F
• Made to CEI 2-3 standard
• Standard voltage: three-phase 400 V/50 Hz
• Fluid temperature range: 0 °C to +55 °C
• Electrical cable: 10 m neoprene, H07 RN-F
• Maximum immersion depth: 20 m
• Installation: fixed or portable in vertical position
• Operating range: from 3 to 39 m3/h with discharge up to 17 m

FEKA 2500/2700

Liron submersible pumps with swirl impeller, suitable for pumping wastewater with solids content up to a maximum
diameter of 62 mm. Motor body, hydraulic part and impeller in cast iron EN GJL 200.
Mechanical seal silicon carbide/silicon carbide in oil chamber. Dry asynchronous sealed motor. Single-phase versions can be
equipped with a float switch.
* For single-phase versions: the capacitor and overcurrent protection are located in an external control unit, which is supplied with a Schuko plug. For three-phase versions: thermal and overcurrent protection is the responsibility of the user.

• Class of protection: IP68
• Insulation class: F
• Continuous operation possible with the pump fully submerged. Supplied as standard with 10 m H07RN-F cable
• Operating range: from 6 to 48 m3/h with discharge up to 17 m
• Pumped liquid: non-aggressive wastewater
• Fluid temperature range: from 0 °C to +40 °C
• Maximum immersion depth: 20 m
• Installation: portable, upright
• Penetration: 62 mm
• Supplied with flange UNI 1.092 PN 6
• Lifting device available: see accessories

FEKA 6000/6100/6200/6300/8100/8200/8300

Liron submersible pumps with swirl impeller for pumping wastewater containing solids with a diameter of 80-108 mm. Single channel impeller (version 6000) and three channel impeller (version 8000). Motor body, hydraulic section and impeller in cast iron EN GJL 200. Mechanical silicon carbide/silicon carbide seal in the oil chamber. Dry asynchronous sealed motor. Thermal and overcurrent protection is installed in the motor winding.

• Class of protection: IP68
• Insulation class: F
• Continuous operation possible with the pump fully submerged. Supplied as standard with H07RN-F 10 m power cable
• Permeability: 80-108 mm
• Operating range: from 36 to 780 m3/h with discharge up to 28 m
• Pumped liquid: non-aggressive wastewater
• Permeability: 80 - 108 mm
• Fluid temperature range: 0 °C to +40 °C
• Maximum immersion depth: 20 m
• Installation: upright