Wholesale e-shop

Fittings - for ALPEX multilayer pipe, 20 x 2 ALU - EK

Code: 500914
naparovana cena na magic
Brand: IVAR
–20 % €3,71 / pcs
In stock (266 pcs)

Detailed information

Product detailed description

Fasteners, IVAR.TA 4420, size: 20 x 2 ALU - EK, packing: 40 pcs in bag / 320 pcs in box
- for ALPEX multilayer pipe

  • PN 10, T = +120 °C
  • wrap Eurocone (EC) or M 24
  • material brass CW617N, O-ring - EPDM
  • tightening torque 25 - 35 Nm
  • suitable for ALPEX pipe

Follow these instructions to properly fit the clamp fitting:

1. Install the clamp fitting in the order and in the snow as indicated in the following illustrations.

IVAR instructions for clamp fittings

2. Insert the pipe and the appropriate EPDM gasket into the fitting and ensure that everything is clean and that there is no damage to the O-ring.

3. Fit the nut onto the thread and hand tighten, use the appropriate size AC 670 / AC 671 spanner to fully tighten

Rubber parts must not be lubricated with mineral oils under any circumstances, only silicone based lubricant should be used on EPDM material.

Additional parameters

Category: clamping screwing to alpex multi-layer pipe
Warranty: 2 roky
Weight: 0.07 kg
Posledná aktuálizacia ceny: 20.11.2024 9:42:13

Be the first who will post an article to this item!

Do not fill out this field:
Vytvořil Shoptet | Design Shoptetak.cz.