Flow-through system with Siliphos H10BB complete
Code: SILIPHOS H10BB-KOMPLETProduct detailed description
Siliphos H10BB complete is used for the treatment of drinking water. Siliphos prevents scaling and rusting which increase energy consumption for water heating. The end effect of using Siliphos is a significant reduction in energy costs.
- It is suitable for a large family home or smaller apartment building.
The H10BB kit comes complete with a mounting wrench, a wall mounting bracket and a container with 1600g of Siliphos.
Basic Characteristics:
The Siliphos flow-through device is a versatile and economical solution that prevents limescale build-up and corrosion in potable water distribution systems and prevents limescale in hot water installations as well as and in all water heating in apartments and houses.
Siliphos flow-through equipment has also been successfully applied in hotels, guest houses, restaurants, fitness centres, shopping malls, apartment buildings, food processing and other manufacturing plants. The application of Siliphos is wherever the water is hard or very soft.
The technical solution for Siliphos:
Siliphos counterflow devices can be installed on any water system and do not need electric current. Installation and refilling is absolutely easy.
Siliphos is a special product, manufactured in Germany and used for more than 35 years throughout Europe. It has the approval of the sanitary authorities in all EU countries for its use for drinking water.
The use of Siliphos is not softening, the water stays the same hardness, i.e. healthy. Hard water is healthier than soft water. Compared to softening, Siliphos is cheaper to procure and to operate.
Siliphos performs three functions:
- It forms a microfilm on the metal surface of pipes, heating elements and coils, on nozzles, metering and control elements, faucets and sanitation mechanisms, which completely prevents scaling and rusting.
- It will not allow calcium and magnesium dissolved in water to settle on metal and ceramic surfaces in the form of scale.
- It will gradually remove old scale and rust deposits from metal surfaces.
The cost of acquisition is very quickly recovered as it will prevent the formation of scale or rust incrustations. Scale and rust in the first place significantly degrades the heat transfer parameters and 30 – 40% more energy is consumed for the same amount of hot water than if scale and rust do not form. The lifetime of the energy equipment is extended. Further savings will be seen in the saving of cleaning agents for taps and ceramic tiles.
The flow-through system in the main drinking water supply will treat all equipment (water pipes, taps, instantaneous water heaters, washing machines, dishwashers, kettles, irons, bathroom tiles, baths, toilets, etc.).
The size of the flow-through system depends on the water consumption. Since peak consumption accounts for about 66% of the total daily consumption and lasts for a maximum of 2 hours, it is necessary to size the flow-through facilities so that there is no shortage of water during peak demand. The maximum working pressure is 10 bar. The pressure loss will be minimal.
- Siliphos has a positive effect on virtually the entire range of water used.
- Siliphos acts against both scale and rust at the same time.
- Siliphos acts as a preventative measure and permanently protects pipes, heaters and fittings.
- Siliphos is the only one that also removes some old limescale deposits at the same time.
- Siliphos is hygienically harmless and approved as safe for drinking water.
- The application of Siliphos does not represent any increase in energy consumption and requires only minimal handling when refilling flow-through devices.
- The consumption of Siliphos is very low. One kilogram of Siliphos will treat up to 500 m3 of water.
Additional parameters
| Category: | protection against limescale |
|---|---|
| Warranty: | 2 roky |
| Weight: | 1 kg |
Be the first who will post an article to this item!