Gv. internal - internal, 1/2" FF

Code: 8363R004

naparovana cena na magic

Brand: IVAR

29702 gulovy uzaver voda perfecta 1 2 ff packa

–20 % €5,36 / pcs

In stock (68 pcs)

Detailed information

Show all related products

Product detailed description

Bulb cap water PERFECTA, FIV.8363, Dimension: 1/2" FF,packaging: 36 pcs in bag / 144 pcs in box

PN 50
T = -20 °C to +120 °C
indoor – indoor FF, lever design
material nickel-plated brass CW617N
ATEST for drinking water, RÚVZ Poprad

The new ball cap is the result of long-term development and demanding operational tests. To increase durability and reduce operating forces, a specially shaped ball and a new seal profile were developed. The recesses on the ball surface significantly reduce the contact area - deposits and silt do not come into contact with the seal when the ball is rotated.

Instructions:

Serves as a shut-off in water, air and other non-aggressive media distribution systems. The does not require maintenance. The valve itself is screwed and glued, this joint must not be disassembled. To guarantee tightness, all actions acting in the direction of the valve body joint are prohibited. The valve must not be disassembled, reassembled and reused. In the event of any damage (other than replacement of the butterfly or lever), the valve must be replaced with a new one. It is permitted to carry out welds at a minimum distance of 20 cm from the edge of the cap. In no case may the of the cap exceed 185°C. The pipe distribution must be constructed in such a way as to guarantee coaxiality without bending stresses on the valve. The valve must not be subjected to shocks. In water distribution service, it is recommended that the valve be repositioned at least once every 6 months throughout the operating range to remove any deposits from the ball.