KDN 32-200.1/7,5 Standard trunnion pump - bronze impeller DAB.KDN
Code: 1D1M211AVRelated products
Product detailed description
KDN 32-200.1/7.5 Standard trunnion pump - bronze impeller
- Single-stage horizontal centrifugal pumps without self-priming function with dimensions according to DIN-EN 733 with axial suction throat and radial discharge throat.
- Pump body, intermediate wall and bearing housing made of cast iron
- Rimming wheel cast iron or bronze. Rotating parts are dynamically balanced, axial forces are compensated hydraulically. The stainless steel shaft is housed in two massive rolling bearings.
- Mechanical seal according to DIN 24960, standard design: carbon/silicon carbide/EPDM
- Speed : 1450-2900 n/min
- Operating range: from 1 to 500 m3/h with discharge height up to 100 m
- Pumped liquid: clean, free of solids and abrasives, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
- Liquid temperature range : -10 °C to +140 °C
- Maximum ambient temperature : + 40 °C
- Fittings : PN 16 DIN 2533, PN 10 DIN 2532 for DN 200
- Special design on request:
- pump for liquids other than water
- other permitted design of bellows
- pump for other liquids than water
- other permitted design of bellows. other versions of the seal
- soft seal
- version with replaceable suction rings
- version with spacer coupling - Motor: two- or four-pole asynchronous, enclosed, cooled by external ventilation
- Motor running and protection must be carried out according to the applicable standards
- Motor shape: B3
- Class of protection: IP55
- Insulation class: F
Additional parameters
Category: | DAB.KDN - standardized gear pumps |
---|---|
Posledná aktuálizacia ceny: | 09.10.2024 8:04:23 |
Be the first who will post an article to this item!
Add a comment