KDN 32-200 Standard billet pump - hydraulic part - cast iron impeller DAB.KDN

Code: 1D1311000

naparovana cena na magic

Brand: IVAR

–10 % €1 415,06 / ks

Show all related products

KDN 32-200 Standard Cascade Pump - Hydraulic Part - Cast Iron Impeller

DAB.KDN

Single-stage horizontal centrifugal pumps without self-priming function with dimensions according to DIN-EN 733 with axial suction throat and radial discharge throat.
Pump body, intermediate wall and bearing housing made of cast iron
Rimming wheel cast iron or bronze. Rotating parts are dynamically balanced, axial forces are compensated hydraulically. The stainless steel shaft is housed in two massive rolling bearings.
Mechanical seal according to DIN 24960, standard design: carbon/silicon carbide/EPDM
Speed : 1450-2900 n/min
Operating range: from 1 to 500 m³/h with discharge height up to 100 m
Pumped liquid: clean, free of solids and abrasives, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
Liquid temperature range : -10 °C to +140 °C
Maximum ambient temperature : + 40 °C
Fittings: PN 16 DIN 2533, PN 10 DIN 2532 for DN 200
Special design on request:
- pump for liquids other than water
- other permitted design of bellows
- pump for other liquids than water
- other permitted design of bellows. other versions of the seal
- soft seal
- version with replaceable suction rings
- version with spacer coupling
Motor: two- or four-pole asynchronous, enclosed, cooled by external ventilation
Motor running and protection must be carried out according to the applicable standards
Motor shape: B3
Class of protection: IP55
Insulation class: F