KDNE 32-125.1/110/A/BAQE/1/1,5/2 M Centrifugal bilge pump for closed systems with MCE15/C DAB.KDNE MCE/C

Product detailed description

KDNE 32-125.1/110/A/BAQE/1/1,5/2 M Centrifugal bilge pump for closed systems with MCE15/C

• Single-stage horizontal centrifugal pumps without self-priming function, controlled by an MCE/C unit that provides infinitely variable speed control with dimensions according to DIN-EN 733 with axial suction throat and radial discharge throat.
• Pump body, intermediate wall and bearing housing are made of cast iron
• Rimming wheel cast iron or bronze. Rotating parts are dynamically balanced, axial forces are compensated hydraulically. The stainless steel shaft is housed in two massive rolling bearings.
• Mechanical seal according to DIN 24960, standard design: carbon/silicon carbide/EPDM
• RPM: 1450-2900 rpm
• Brushing fluid: clean, free of solids and abrasives, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
• Liquid temperature range: -10 °C to +140 °C
• Operating range: from 1 to 450 m³/h with a displacement of up to 70 m
• Maximum ambient temperature: + 40 °C
• Fittings: PN 16 DIN 2533, PN 10 DIN 2532 for DN 200
• Special design on request:
  - pump for liquids other than water
  - other permitted design of bellows
  - pump for other liquids than water
  - other permitted design of bellows. other versions of the seal
  - soft seal
  - version with exchangeable suction rings
  - version with spacer coupling
• Motor: two- or four-pole asynchronous, enclosed, cooled by external ventilation
• Motor running and protection must be carried out according to the applicable standards
• Motor shape: B3
• Class of protection: IP55
• Insulation class: F
• Maximum operating pressure: 16 bar - 1600 kPa