KPS 30/16 T Peripheral pump DAB.KPS

Product detailed description

KPS 30/16 T Peripheral pump

• Pump body cast iron
• Median, impeller and pressure disc are brass
• Closed asynchronous motor cooled by external ventilation
• Built-in thermal motor protection and capacitor for single phase version
• For three-phase motors, suitable motor overload protectors must be used
• Class of protection: IP44
• Insulation class: F
• Made according to CEI 2-3 and CEI 61-69 (EN 60335-2-41)
• Operating range: from 8 to 45 l/min with discharge up to 53 m
• Fluid temperature range: from 0 °C to + 35 °C (EN 60335 -2-41 for domestic use) from -10 °C to + 80 °C (for other applications)
• Pumped liquid: clean, free of solids and abrasive substances, non-aggressive, non-viscous, non-crystallising, chemically neutral, properties close to water
• Maximum working pressure: 10 bar (1000 kPa)

Pumps KP 60/6M, KP 60/6T, KP 60/12 M, KP 60/12 T

Pump body, impeller made of brass. Mechanical seal carbon/ceramic. Stainless steel motor shaft. Asynchronous motor cooled by external ventilation. Motor overload protection for single-phase version (permanently connected capacitor). For three-phase motors, suitable motor overload protection must be used.

• Rating of protection: IP44
• Insulation class: F
• Standard voltage: 1x230V 50Hz 3x230-400V 50Hz
• Operating range: from 1 to 35 l/min with discharge up to 107 meters
• Pumped liquid: clean, no solids or abrasives, non-aggressive
• Fluid temperature range: from 0°C to + 35°C for domestic use (EN 60335-2-41) from - 10°C to + 80°C for other applications Maximum ambient temperature: + 40°C
• Maximum working pressure: 12 bar (1200 kPa)
• Installation: fixed in horizontal position