Manifold assembly - without cabinet, 1" x EC, 9-way
Code: 551767NRelated products
Product detailed description
Assembly distributor - without cabinet, IVAR.CS 501 NS, size: 1" x EK, 9-way, cabinet: P3/N3
- PN 10, T = +120 °C
- assembly includes: splitter and header, fixing brackets, inlet ball caps and plugs
- side inlets 1“ F
- outlets 3/4“ EC
- outlet spacing 50 mm
- plugs 1/2”, 1“
- material nickel-plated brass CW617N
Recommended for radiator system temperature gradient +75 ?C
Circulation pump fitted:without pump (not necessary as pump replaces boiler)
Note: Seller is not responsible for functional faults caused by impurities in the system.
Before any commissioning of the heating system, especially when combining underfloor and radiator heating, it is strongly recommended to flush the entire system according to the manufacturer's instructions. We recommend treating the system with GEL.POLY A.P.
The manifolds are to be stored in cabinets, their recommended lengths are given in the manifold table. Fitting the dividers in the highest point is virtually a requirement (beware of level changes in floor plans). The exception to this is the venting of small floor dividers on the upper floor via the bathroom ladder. If the floor system is made only in the bathrooms, it is possible to use piping from the return branch of the radiator system with a polyethylene protector or to use a direct acting temperature controller at the end of this parallel loop to ensure cooling to a low temperature level (caution! it must be thermally separated from the return line of the radiator circuit so that it is not thermally affected).
For further information, you can go to https://www.systemova-doska.sk/podlahove-vykurovanie/
Additional parameters
| Category: | IVAR CS 501 NS |
|---|---|
| Warranty: | 2 roky |
| Weight: | 6.628 kg |
| Posledná aktuálizacia ceny: | 21.11.2024 22:21:21 |
Be the first who will post an article to this item!
Add a comment