S4 2/14 T 4OL 4" submersible pump for boreholes and wells - 0,75KW - 3x400V DAB.S4 OL

Product detailed description

S4 2/14 T 4OL Submersible 4" Borehole and Well Pump - 0.75KW - 3x400V

Submersible centrifugal pumps for wells and boreholes, larger than 4" diameter. The pumps are used for pumping water, for pressurizing
and supplying water, in the distribution systems of small and large buildings, civil and industrial, as well as for irrigation, washing and firefighting
systems. Technopolymer impellers, with suction rings, stainless steel. Pump casing, shaft, motor coupling, integrated suction filter and stainless steel cable cover. Suction body, discharge body and hanging lugs in AISI 304 microalloyed stainless steel. Removable integrated check valve in technopolymer or stainless steel (depending on model). Technopolymer impellers designed to ensure a high level of efficiency in compliance with the 2009/125/EC Directive (Eco design - ErP) with MEI ≥ 0.4 for the entire range. ACS certified, WRAS certified.

The 4OL motor is a two-pole asynchronous motor whose parts in contact with water are made of AISI 304L stainless steel. Cooling and lubrication of the ball bearings is provided by a special food grade liquid. The rewindable stator is housed in an AISI 304L stainless steel housing, fixed by steel pins to the upper motor support.
Equipped with a carbon-ceramic mechanical seal.

- Operating range: up to 21.6 m³/h with a discharge up to 427 meters
- Pumped liquid: clean, free of solids and abrasives, non-viscous, non-aggressive, chemically neutral, properties close to water
- Maximum pump diameter: 99 mm
- Maximum sand quantity: 150 g/m3
- Discharge port diameter: S4-1, S4-2, S4-3, S4-4, S4-6: 1 1/4"
S4-8, S4-12, S4:16: 2"
- Impeller material: Technopolymer
- Fluid temperature range: 0°C to +40°C
- Maximum immersion: 4OL: 250 m
- Maximum number of starts: 20/h
- Degree of protection: IP68
- Insulation class: F
- Single-phase voltage: 1x230 V 50 Hz
- Three-phase voltage: 3x230 V 50 Hz - 3x400 V 50 Hz
- Installation: upright. Horizontal installation is possible, it is recommended to install a cooling jacket.