Product detailed description

Stainless steel distributor for floor heating with electronic pump

The manifolds are made of high quality stainless steel according to the German standard DIN EN 1264-4:2009-11.

The dividers can be used on all types of plastic pipes, including multi-layer pipes and copper. Piping is connected using a 3/4" EK fitting.

Distributors for underfloor heating are equipped with double-regulating flow meters with flow indicator (Regolux 0-5 l/min) with memory and thermoregulating valves (with M30 x 1.5 connection) on each circuit so that each heating circuit can be regulated separately.

The manifold includes automatic vent valves, rotary drain valves and nickel-plated carriers.

Specification of the manifold:

• automatic venting
• connection of pipes 15, 16, 20 with RCS 15, 16, 20 clamping fittings
• power: 25kW at Δt 10k; 2.14 m³/hr
• country of origin: Germany

Technical parameters of the manifold:

• destination: heating and cooling systems
• acceptable fluid temperatures: -10 °C to +120 °C
• maximum permissible operating temperature: +80 °C
• max. permissible operating pressure: 6 bar
• max. test pressure: 10 bar
• measuring range: 0 - 5 l/min
• flow rate: 2.14 m³/h
• material: brass, heat resistant plastic, stainless steel 1.4301
• seal:EPDM
• measurement accuracy: ±10%
• thread: DIN ISO EN 228-1
• liquids: heating water, cooling water, aqueous mixtures with standard anti-corrosion antifreeze
• Armature: Press-Messing Ms 58, nickel plated
• flat seal: WS 3825
• Sound insulation: DIN 4109
• recommended pipe: PEX-AL-PEX 16 x 2
• recommended pipe fitting connections: ALPEX 16 x 2 ALU-EK
• branch connections: Ek, Eurokonus
• inlet and outlet connection: 1"
• flowmeters: double regulated with locking capability

Technical parameters of the pump:

• min. power: 6 W
• max. power: 44 W
• max. flow rate: 3.6 m³/h
• max. discharge: 7 m
• power supply: 230V/50Hz
• maximum pipe pressure: 10 bar
• mounting length: 130 mm
• connection thread - nut: 6/4"
• maximum temperature: 120 °C
• type of flow control: electronic
• operating options:constant pressure, proportional pressure, constant speed

Assembly includes:

• DAB Evosta 40/70-130 electronic pump
• thermomanometer on return line
• Oventrop thermoregulating valve
• temperature probe with capillary
• backflow preventer
• distributor with automatic venting

• stainless steel body with brackets
• automatic venting
• drain swivel valves
• double-control flow meters with memory
• stainless steel thermoregulating valves with actuator, connection M30 x1,5

The seller is not responsible for functional defects caused by impurities in the system. We therefore recommend a thorough flushing of the entire system according to the manufacturer's instructions before any commissioning of the heating system.