Water meter shaft round PP small

Product detailed description

This water meter shaft is made of 6 and 8 mm thick polypropylene plates, which are welded together. It is used for the location of the water meter when supplying objects to the water supply. The manhole is sufficiently reinforced and therefore in cases where there is no ground water and the manhole will not be mobile or located close to the road, it is sufficient to place the manhole on the underlying concrete and to fill it evenly with sand or sieved soil. Although the manhole is watertight, in the event of groundwater, when the manhole is mobile or close to a road, the manhole must be concreted and secured to prevent groundwater from penetrating the manhole walls. It is not recommended to use an incompletely backfilled water meter shaft, it could be damaged in winter. It is forbidden to handle this water meter shaft at temperatures lower than -3 °C. The water meter shaft includes: steps inside the shaft to facilitate access to the water meter installation two watertight shaft transitions for connecting the pipes marching hatch (for walking only) The water meter is not included in the delivery of the water meter shaft. Technical data: Depth of placement: 120 cm Connection dimension inlet: DN 32 Connection dimension outlet: DN 32 Possible number of water meter connections: max 3pcs