DAB.KPF, DAB.KPS - peripheral pumps
PERIPHERAL PUMPS
DAB.KPF, DAB.KPS
Cast iron pump body
The intermediate piece, the impeller and the pressure disc are made of brass
Closed asynchronous motor cooled by external ventilation
Built-in motor thermal protection and capacitor in the single-phase version
For three-phase motors, it is necessary to use suitable motor overload protection
- Degree of protection: IP44
- Insulation class: F
- Made according to the CEI 2-3 and CEI 61-69 standards (EN 60335-2-41)
- Operating range: from 8 to 45 l/min with a discharge of up to 53 m
- Liquid temperature range: from 0 °C to + 35 °C (EN 60335 -2 – 41 for domestic use) from -10 °C to + 80 °C (for other uses)
- Pumped liquid: clean, without solid and abrasive substances, non-aggressive, non-viscous, non-crystallizing, chemically
- neutral, properties close to water
- Maximum working pressure: 10 bar (1000 kPa)
Pumps KP 60/6M, KP 60/6T, KP 60/12 M, KP 60/12 T
Pump body, brass impeller. Carbon/ceramic mechanical seal. Stainless steel motor shaft. Asynchronous motor cooled by external ventilation. Motor overload protection in the single-phase version (permanently connected capacitor). For three-phase motors, it is necessary to use a suitable motor overload protection.
- Degree of protection: IP44
- Insulation class: F
- Standard voltage: 1x230V 50Hz 3x230-400V 50Hz
- Operating range: from 1 to 35 l/min with a discharge of up to 107 meters
- Pumped liquid: clean, without solid or abrasive substances, non-aggressive
- Liquid temperature range: from 0°C to + 35°C for domestic use (EN 60335-2-41) from - 10°C to + 80°C for other uses
- Maximum ambient temperature: + 40°C
- Maximum working pressure: 12 bar (1200 kPa)
- Installation: fixed in a horizontal position.
Bestsellers
7 items total
